Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Mẫu số: LDC, LD, LDP, HD
Thương hiệu: DGCrane
Bao bì: Palăng điện được đóng gói bằng thùng ván ép, các loại khác được đóng gói bằng vải không dệt
Năng suất: 1500sets/month
Giao thông vận tải: Ocean,Land,Air
Xuất xứ: Trung Quốc
Hỗ trợ về: 18000 sets/year
Giấy chứng nhận: ISO
Mã HS: 84261120
Hải cảng: Qingdao Port,Tianjin Port,Shanghai Port
Hình thức thanh toán: L/C,T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT
Giới thiệu tóm tắt về cầu trục dầm đơn 15 tấn cho thiết kế nhà xưởng
Cần trục dầm đơn là loại cần trục cầu trên cao có một dầm cầu hỗ trợ xe đẩy và vận thăng. Xe đẩy và vận thăng đi trên mặt bích dưới cùng của dầm cầu. Cần trục dầm đơn được coi là chạy trên cùng khi dầm cầu chạy trên đầu dầm đường băng.
Ứng dụng: Cần trục này thường được sử dụng trong nhà, chẳng hạn như nhà xưởng, nhà máy, kho bãi, ... để nâng hạ hàng hóa. Không được sử dụng thiết bị trong môi trường dễ cháy, nổ hoặc ăn mòn.
Cầu trục dầm đơn loại khoảng không thấp
Có những kho hàng hạn chế về chiều cao từ giá đỡ đến mặt đất mà cần chiều cao nâng cao hơn thì chúng tôi sẽ thiết kế cầu trục dầm hộp vuông và vận thăng lồng thấp, sẽ có chiều cao nâng cao hơn.
Cầu trục dầm đơn kiểu treo
Đối với một số nhà kho , có dầm bê tông trên trần, nhưng không có cột. Theo nhu cầu thực tế cần có cẩu treo, vì vậy chúng tôi sẽ đề xuất loại cẩu treo treo trên dầm bê tông nếu mái có thể chịu đủ trọng lượng.
Cầu trục dầm đơn loại Châu Âu
Đối với xưởng sản xuất các sản phẩm công nghệ cao, hoặc nếu bạn có yêu cầu về tiếng ồn thấp, thì nên sử dụng cẩu loại Châu Âu.
Cầu trục dầm đơn loại treo bên
Trong một số nhà kho , chiều cao cột bị hạn chế, nhưng có nhiều không gian từ đỉnh cột đến trần nhà. Theo điều kiện này, chúng tôi sẽ cung cấp loại cầu trục treo bên với palăng treo bên, điều này sẽ làm cho chiều cao nâng cao hơn.
Incoming material test |
Every batch of raw materials must be tested when
they enter the factory. We set up a special testing room.It covers non-destructive
inspection room, metallographic analysis and hardness inspection room, mechanics
inspection and chemical inspection room. Testing methods has non-destructive
testing,metallographic analysis, mechanical testing and chemical analysis, mainly
testing and control of the raw materials, crane components, product |
Uncoiling and flattening the steel plate |
After uncoiling, leveling, sizing and shearing,
the required length and width of the flat sheet can be obtained, which can
protect the flat sheet without scars, high shearing accuracy, double palletizing and discharging, high efficiency and speed. |
Pressure Groove |
According to crane specifications to groove
pressing with different model, and main girder forming at one time can realize that the
U-groove of the whole main girder of single girder crane has no butt weld, thus
reducing stress concentration point, improving the strength and stiffness of the main
girder, and greatly improving the comprehensive bearing capacity of the main
girder. |
Welding Stiffener |
There is a support which can keep the main girder
be not deformed, and workers can work easily without bending. |
Welding main beam with the ending | |
Welding I beam and ventral |
Submerged arc welding (SAW) is a kind of
protective welding with Rohm double gun automatic welding, which has the advantages of
full weld, deep molten pool, beautiful shape and high welding quality. At the same
time, the welding distortion is reduced. |
Checking span,welding flange |
In production, the hanging plates of the main
girder and the end girder are processed together, punched together, and then knock down
from end beam and weld to the main girder. |
Painting |
Two-layer primer, two-layer paint |
Steel parts | Steel parts are packed in polythene woven cloth, which can prevent rainwater from directly contacting the crane and protect the painting |
Electric parts and hoist |
Electric parts are packed by strong plywood crate case, which plays a
protective and moistureproof role. |
Basic informations needed of single girder overhead crane |
1. Capacity:_ ( max weight of material) 2. Span:_ ( rail center to rail center) 3. Lifting height:_ ( from ground to hook) 4. Crane traveling length:_m 5. What goods will the crane lift? 6. Working environment: 7. Speed requirement: 8. Comtrol method: control pendent, remote control, cabin control ( normally choose controll pendent and remote control) |
Danh mục sản phẩm : Cầu trục trên không > Cầu trục dầm đơn
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.